Butch Automatic  Circa 1974

 


 
SETUP AND TECHNICAL 

1.  STAGING REQUIREMENTS
 

3.  DRESSING AREA 
2.  ELECTRICAL REQUIREMENTS  4.  STAGING REQUIREMENTS 
2.  ELECTRICAL REQUIREMENTS 
   
 

ELECTRICAL GUIDELINES
     We go all-out to make your event special and memorable.  To do this we use a unique state-of-the-art, computerized lighting system complete with intelligent lights.  This is a tool we use to add to the excitement!
    Besides lighting, we have a whole host of audio equipment that needs its share of power!
    Below are the details of the total amount of power required for our full stage productions!

AC CIRCUITS REQUIRED 
8 - Independent, 20 Amp, 120 VAC Circuits

     With the 13,200 watts of lighting and all the stage equipment the band needs 8 independent 20 amp circuits.

     Each separate 20 Amp circuit breaker should control one, common duplex ac outlet as shown here.

     If you have any questions regarding power, don't hesitate to ask.  We can accommodate just about any situation!
   
NOTE: 
     Be sure not to confuse the word "circuit" with "outlet."  A common multi-outlet strip may provide 6 or 8 "outlets", however they do not represent separately controlled "circuits."  
     All outlets MUST be wired in accordance to NEMA standards and local codes.








AC outlets on an outlet strip
DO NOT represent
separate and independent  20 Amp Circuits!

 
 
 

Copyright © 2010 Butch Automatic Productions Ltd. All rights reserved